What is Stability and Why is it Important? – Dwyer Instruments Blog (2024)

What is Stability and Why is it Important? – Dwyer Instruments Blog (1)Stability is defined as a change (or lack of change) in accuracy over a period of time.

Drift is commonly used as a specification to illustrate the stability, or change in accuracy over a period of time, commonly shown as X%/year where X = a number; i.e. 0.25%/year. In this scenario, a device with a ±1% accuracy, would be expected to have an accuracy of ±1.25% (1%+0.25%) after a period of one year. Depending on the design, brand, and range of the sensing instrument, the stability can vary widely.

There are many benefits in utilizing sensors and instrumentation with great long-term stability.

Stability reduces out-of-calibration issues. If a measurement device drifts out of calibration, it can be measured incorrectly and risk exposure of personnel or patients to harmful microorganisms in pressure monitoring applications in healthcare settings.

HVAC SYSTEMS
What is Stability and Why is it Important? – Dwyer Instruments Blog (2)Stability improves HVAC system performance by increasing overall efficiency and reducing the need for costly maintenance. If an air handler, VAV system, or chiller/boiler system is running inefficiently, components are more likely to wear and break down faster than in a more efficient system.

The reduction in downtime associated with maintenance and recalibration is another benefit of stability. Stability helps to ensure full production capacity and can be recalibrated on a scheduled date/time that corresponds to a plant shutdown/plant maintenance schedule.

Stability also ensures patient rooms are available and not out-of-calibration, which is especially useful in healthcare facilities with an above average patient capacity.

In critical environments, stability ensures safety standards are maintained.

SEMICONDUCTOR MANUFACTURING
If pressure, temperature, and relative humidity (RH) are not maintained properly in semiconductor manufacturing areas, it may result in infiltration of dust and particulates from not maintaining a proper differential pressure, a spike or drop in RH, or a change in temperature, which may damage products being manufactured.

PHARMACEUTICAL MANUFACTURING
What is Stability and Why is it Important? – Dwyer Instruments Blog (3)Similarly, in pharmaceutical manufacturing and compounding areas, if these parameters are not maintained properly, infiltration of microorganisms from not maintaining a proper differential pressure, a spike or drop in RH, or a change in temperature could contaminate drug or provide unsuitable storage/manufacturing conditions.

HEALTHCARE FACILITIES
What is Stability and Why is it Important? – Dwyer Instruments Blog (4)Lastly, the infiltration of viruses, bacteria, or pathogens from or into an isolation room, clean room, and/or operating room is key to maintaining patient and personnel health. Maintaining a proper differential pressure in these critical healthcare environments will help prevent the spreads of illnesses caused by infectious microorganisms.

HOW DWYER CAN HELP
Dwyer’s new Series RPMC StabiliSENSE™ critical room pressure monitor provides the advanced features, high accuracy, and ranges necessary for use with pharmaceutical compounding areas and semiconductor manufacturing facilities.

What is Stability and Why is it Important? – Dwyer Instruments Blog (5)

The Series RPMC StabiliSENSE™ critical room pressure monitor can be flush or surface mounted in the same size diameter hole as a Magnehelic® gage. This simplifies upgrades from a Magnehelic® gage to the new room pressure monitors. It comes standard with two independent SPDT relays and a 4-20 mA analog output. The RPMC contains a capacitance cell pressure sensor, providing a high degree of accuracy and long-term stability.

The Series RPMC is a complete system allowing for access to pressure, security, calibration, and alarm setup. Visual indication, an easy-to-clean stainless steel bezel, and passcode protection make pressure monitoring in critical applications easier than ever.

If you have any questions, the Dwyer Applications Engineers are available to assist by phone at (219) 879-8868 x6402, or by email at tech@dwyermail.com.

What is Stability and Why is it Important? – Dwyer Instruments Blog (2024)
Top Articles
Latest Posts
Article information

Author: Cheryll Lueilwitz

Last Updated:

Views: 5717

Rating: 4.3 / 5 (54 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Cheryll Lueilwitz

Birthday: 1997-12-23

Address: 4653 O'Kon Hill, Lake Juanstad, AR 65469

Phone: +494124489301

Job: Marketing Representative

Hobby: Reading, Ice skating, Foraging, BASE jumping, Hiking, Skateboarding, Kayaking

Introduction: My name is Cheryll Lueilwitz, I am a sparkling, clean, super, lucky, joyous, outstanding, lucky person who loves writing and wants to share my knowledge and understanding with you.